hadoop开启Service Level Authorization 服务级认证

  • 时间:
  • 浏览:1
  • 来源:极速快3_快3IOS下载_极速快3IOS下载

背景描述

  最近在进行安全扫描的就让,说hadoop占据 漏洞,Hadoop 未授权访问【原理扫描】,就让就参考官方文档及这一资料,在测试环境中进行了开启,里面就遇到了这一这一的坑,机会说这一人没有 想明白的那先 的问题,在此记录下吧,这一那先 的问题搞了2天。

环境描述

  hadoop版本:2.6.2

操作步骤

1.我想要开启服务级认证,需要在core-site.xml文件中开启参数hadoop.security.authorization,将其设置为true

<property>
  <name>hadoop.security.authorization</name>
  <value>true</value>
  <description>Is service-level authorization enabled?</description>
</property>

备注:根据官方文档的解释,设置为true这一这一simple类型的认证,基于OS用户的认证.现在服务级的认证机会开启了。

增加此参数就让,需要重启namenode:

sbin/hadoop-daemon.sh stop namenode
sbin/hadoop-daemon.sh start namenode

怎么可否 知道算是真正的开启了该配置,查看hadoop安全日志SecurityAuth-aiprd.audit,机会有新日志增加,里面蕴藏认证信息,说明开启成功。

2.针对具体的各个服务的认证,在配置文件hadoop-policy.xml中

<configuration>
  <property>
    <name>security.client.protocol.acl</name>
    <value>*</value>
    <description>ACL for ClientProtocol, which is used by user code
    via the DistributedFileSystem.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.client.datanode.protocol.acl</name>
    <value>*</value>
    <description>ACL for ClientDatanodeProtocol, the client-to-datanode protocol
    for block recovery.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.datanode.protocol.acl</name>
    <value>*</value>
    <description>ACL for DatanodeProtocol, which is used by datanodes to
    communicate with the namenode.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.inter.datanode.protocol.acl</name>
    <value>*</value>
    <description>ACL for InterDatanodeProtocol, the inter-datanode protocol
    for updating generation timestamp.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.namenode.protocol.acl</name>
    <value>*</value>
    <description>ACL for NamenodeProtocol, the protocol used by the secondary
    namenode to communicate with the namenode.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

 <property>
    <name>security.admin.operations.protocol.acl</name>
    <value>*</value>
    <description>ACL for AdminOperationsProtocol. Used for admin commands.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.refresh.user.mappings.protocol.acl</name>
    <value>*</value>
    <description>ACL for RefreshUserMappingsProtocol. Used to refresh
    users mappings. The ACL is a comma-separated list of user and
    group names. The user and group list is separated by a blank. For
    e.g. "alice,bob users,wheel".  A special value of "*" means all
    users are allowed.</description>
  </property>

  <property>
    <name>security.refresh.policy.protocol.acl</name>
    <value>*</value>
    <description>ACL for RefreshAuthorizationPolicyProtocol, used by the
    dfsadmin and mradmin commands to refresh the security policy in-effect.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.ha.service.protocol.acl</name>
    <value>*</value>
    <description>ACL for HAService protocol used by HAAdmin to manage the
      active and stand-by states of namenode.</description>
  </property>

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>*</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

  <property>
    <name>security.qjournal.service.protocol.acl</name>
    <value>*</value>
    <description>ACL for QJournalProtocol, used by the NN to communicate with
    JNs when using the QuorumJournalManager for edit logs.</description>
  </property>

  <property>
    <name>security.mrhs.client.protocol.acl</name>
    <value>*</value>
    <description>ACL for HSClientProtocol, used by job clients to
    communciate with the MR History Server job status etc. 
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <!-- YARN Protocols -->

  <property>
    <name>security.resourcetracker.protocol.acl</name>
    <value>*</value>
    <description>ACL for ResourceTrackerProtocol, used by the
    ResourceManager and NodeManager to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.resourcemanager-administration.protocol.acl</name>
    <value>*</value>
    <description>ACL for ResourceManagerAdministrationProtocol, for admin commands. 
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.applicationclient.protocol.acl</name>
    <value>*</value>
    <description>ACL for ApplicationClientProtocol, used by the ResourceManager 
    and applications submission clients to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.applicationmaster.protocol.acl</name>
    <value>*</value>
    <description>ACL for ApplicationMasterProtocol, used by the ResourceManager 
    and ApplicationMasters to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.containermanagement.protocol.acl</name>
    <value>*</value>
    <description>ACL for ContainerManagementProtocol protocol, used by the NodeManager 
    and ApplicationMasters to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.resourcelocalizer.protocol.acl</name>
    <value>*</value>
    <description>ACL for ResourceLocalizer protocol, used by the NodeManager 
    and ResourceLocalizer to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.job.task.protocol.acl</name>
    <value>*</value>
    <description>ACL for TaskUmbilicalProtocol, used by the map and reduce
    tasks to communicate with the parent tasktracker.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.job.client.protocol.acl</name>
    <value>*</value>
    <description>ACL for MRClientProtocol, used by job clients to
    communciate with the MR ApplicationMaster to query job status etc. 
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>

  <property>
    <name>security.applicationhistory.protocol.acl</name>
    <value>*</value>
    <description>ACL for ApplicationHistoryProtocol, used by the timeline
    server and the generic history service client to communicate with each other.
    The ACL is a comma-separated list of user and group names. The user and
    group list is separated by a blank. For e.g. "alice,bob users,wheel".
    A special value of "*" means all users are allowed.</description>
  </property>
</configuration>

备注:默认有10个服务,每个服务的默认值都在*,表示的这一这一任何的用户都可不还可否 对其进行访问。

3.目前只需要针对客户端那先 用户都可不还可否 访问namenode即可,即修改参数security.client.protocol.acl的值

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>aiprd</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

备注:表示客户端进行对应的用户是aiprd的就可不还可否 访问namenode。

刷新ACL配置:

bin/hdfs dfsadmin -refreshServiceAcl

修改格式如下:

<property>
     <name>security.job.submission.protocol.acl</name>
     <value>user1,user2 group1,group2</value>
</property>

备注:该值是,用户之间逗号隔开,用户组之间用逗号隔开,用户和用户组之间用空格分开,机会没有 用户,要以空格开头里面接用户组。

4.远程客户端访问hdfs中文件进行验证

[aiprd@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/
Found 10 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 04:31 hdfs://hadoop1:9000/hbase
drwxr-xr-x   - aiprd  hadoop              0 2019-08-14 06:40 hdfs://hadoop1:9000/test01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:22 hdfs://hadoop1:9000/test02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:39 hdfs://hadoop1:9000/test03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:500 hdfs://hadoop1:9000/test07
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:31 hdfs://hadoop1:9000/test08
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:32 hdfs://hadoop1:9000/test09
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 06:41 hdfs://hadoop1:9000/test10
drwxrwx---   - aiprd  supergroup          0 2019-08-14 07:06 hdfs://hadoop1:9000/test11
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12

备注:在客户端上,将hadoop的守护进程运行部署在aiprd用户下,执行命令都可不还可否 查看其中的文件、文件夹信息。一起,aiprd用户也是启动namenode的用户即hadoop中的超级用户,这一这一,查看一遍的文件的用户组都在aiprd.

5.测试,机会增加机会使用这一的用户算是可不还可否

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>aiprd1</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

刷新ACL配置。

bin/hdfs dfsadmin -refreshServiceAcl

将用户修改aiprd1。即没有 客户端的守护进程运行用户是aiprd1可不还可否 访问。

6.在客户端中,继续使用就让部署在aiprd用户下的hadoop客户端进行访问

[aiprd@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/
ls: User aiprd (auth:SIMPLE) is not authorized for protocol interface org.apache.hadoop.hdfs.protocol.ClientProtocol, expected client Kerberos principal is null

备注:发现aiprd用户是没有 访问的了

7.客户端中,在aiprd1用户下,在部署hadoop客户端,就让进行访问

[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
Found 6 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:44 hdfs://hadoop1:9000/test12/04
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:49 hdfs://hadoop1:9000/test12/05
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12/10

备注:是都可不还可否 访问的,这一这一,机会要使用用户来进行认证,没有 客户端守护进程运行对应的OS用户,需要要和hadoop-policy.xml中配置的用户一致就让没有 访问。

既然,服务级参数的值,可不还可否 有用户,也可不还可否 有用户组,用户验证完了,没有 来验证用户组吧,此时,就遇到了这一这一的坑。

1.还是就让的参数security.zkfc.protocol.acl,这次使用,用户组

  <property>
    <name>security.zkfc.protocol.acl</name>
    <value>aiprd hadoop</value>
    <description>ACL for access to the ZK Failover Controller
    </description>
  </property>

刷新ACL配置:

/bin/hdfs dfsadmin -refreshServiceAcl

没有 那先 的问题来了,就让的用户是基于OS级别的判断,这一应该也是,也这一这一判断我这一用户到底是都在这一用户组里面的。

2.在客户端上aiprd用户下的守护进程运行是可不还可否 访问的,经过就让的验证没有 那先 的问题

3.在客户端上,在aiprd1下部署hadoop客户端守护进程运行,正常是访问不了hdfs的,没有 将aiprd1加入到这一hadoop组下,理论上是可不还可否 访问的

[aiprd1@localhost ~]$ id aiprd1
uid=50001(aiprd1) gid=50001(aiprd1) groups=50001(aiprd1),50002(hadoop)
[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
ls: User aiprd1 (auth:SIMPLE) is not authorized for protocol interface org.apache.hadoop.hdfs.protocol.ClientProtocol, expected client Kerberos principal is null

经过验证,是没有 否的,说明这一hadoop分组并没有 起作用。

试了如下的最好的办法:

  • --1.hadoop.security.group.mapping 改了这一参数的值,随便说说这一参数有默认的值,需要进行设置的
  • --2.在hdfs所有的节点都建了hadoop用户组,还是没有 处置那先 的问题
  • --3.默认的hdfs中文件的用户组是supergroup,也尝试将aiprd1加入到supergroup中,还是没有 作用
  • --4.使用aiprd这一超级用户,将hdfs中文件的用户组改为hadoop还是没有 效果
  • --5.尝试在namenode上将aiprd加入到hadoop组还是没有 效果。

随便说说没有 最好的办法,开启DEBUG吧,开启就让,获得信息如下:

2019-08-15 15:12:27,188 WARN org.apache.hadoop.security.ShellBasedUnixGroupsMapping: got exception trying to get groups for user aiprd1: id: aiprd1: No such user

2019-08-15 15:12:27,188 WARN org.apache.hadoop.security.UserGroupInformation: No groups available for user aiprd1
adoop.hdfs.protocol.ClientProtocol, expected client Kerberos principal is null
:SIMPLE)
2019-08-15 15:12:27,188 DEBUG org.apache.hadoop.ipc.Server: Socket Reader #1 for port 9000: responding to null from 192.168.500.1:61985 Call#-3 Retry#-1
2019-08-15 15:12:27,188 DEBUG org.apache.hadoop.ipc.Server: Socket Reader #1 for port 9000: responding to null from 192.168.500.1:61985 Call#-3 Retry#-1 Wrote 243 bytes.
izationException: User aiprd1 (auth:SIMPLE) is not authorized for protocol interface 

意思是说,当试着为这一用户查找用户组的就让,没有 这一用户,就很奇怪,明明是有用户的啊。就让就基于这一报错各种查找,就让在下面的文章中获得了点启示:

https://www.e-learn.cn/content/wangluowenzhang/1136832
To accomplish your goal you'd need to add your user account (clott) on the NameNode machine and add it to hadoop group there.

If you are going to run MapReduce with your user, you'd need your user account to be configured on NodeManager hosts as well.

4.按照这一意思,在Namenode节点上,创建aiprd1用户,并加入到hadoop用户组里面。

[root@hadoop1 ~]# useradd -G hadoop aiprd1
[root@hadoop1 ~]# id aiprd1
uid=5003(aiprd1) gid=5003(aiprd1) groups=5003(aiprd1),5002(hadoop)
[root@hadoop1 ~]# su - aiprd
[aiprd@hadoop1 ~]$ jps
15289 NameNode
15644 Jps

备注:此节点运行了NameNode.

5.再次在hadoop客户端上,aiprd1用户下执行查询操作

[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
Found 6 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:44 hdfs://hadoop1:9000/test12/04
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:49 hdfs://hadoop1:9000/test12/05
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12/10

可不还可否 进行查询了。

在客户端上,将aiprd1对应的用户组hadoop加在。

[aiprd1@localhost ~]$ id
uid=50001(aiprd1) gid=50001(aiprd1) groups=50001(aiprd1)

再次执行查询:

[aiprd1@localhost ~]$ hdfs dfs -ls hdfs://hadoop1:9000/test12
Found 6 items
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/01
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/02
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:43 hdfs://hadoop1:9000/test12/03
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:44 hdfs://hadoop1:9000/test12/04
drwxr-xr-x   - aiprd  supergroup          0 2019-08-14 23:49 hdfs://hadoop1:9000/test12/05
drwxr-xr-x   - aiprd1 supergroup          0 2019-08-15 00:10 hdfs://hadoop1:9000/test12/10

还是可不还可否 查询的,可不还可否 看出来,用户组和客户端上用户所在的组没有 关系,需要在Namenode节点设置。

查看官方,有如下解释:

Once a username has been determined as described above, the list of groups is determined by a group mapping service, configured by the hadoop.security.group.mapping property. The default implementation, org.apache.hadoop.security.JniBasedUnixGroupsMappingWithFallback, will determine if the Java Native Interface (JNI) is available. If JNI is available, the implementation will use the API within hadoop to resolve a list of groups for a user. If JNI is not available then the shell implementation, org.apache.hadoop.security.ShellBasedUnixGroupsMapping, is used. This implementation shells out with the bash -c groups command (for a Linux/Unix environment) or the net group command (for a Windows environment) to resolve a list of groups for a user.

An alternate implementation, which connects directly to an LDAP server to resolve the list of groups, is available via org.apache.hadoop.security.LdapGroupsMapping. However, this provider should only be used if the required groups reside exclusively in LDAP, and are not materialized on the Unix servers. More information on configuring the group mapping service is available in the Javadocs.

For HDFS, the mapping of users to groups is performed on the NameNode. Thus, the host system configuration of the NameNode determines the group mappings for the users.

Note that HDFS stores the user and group of a file or directory as strings; there is no conversion from user and group identity numbers as is conventional in Unix.

对于HDFS来说,用户到组的映射关系是在NameNode上执行的,就让,NameNode的主机系统配置决定了用户组的映射。

实验就让才看明白,就让根本没有 理解,以为是从客户端拿到用户对应的用户组信息,就让到NameNode来进行判断呢。

这一这一,到这里,基于服务级的ACL,用户、用户组的都机会可不还可否 配置了,对于这一的服务,可不还可否 根据实际情况汇报进行配置。这里面我希望求那先 用户、用户组可不还可否 连接上来就好了。

小结

  1.hadoop.security.authorization设置为true,开启simple认证,即基于os用户的认证,配置就让,重启namenode

  2.acl为用户认证的,保证服务acl中配置的值与客户端守护进程运行运行对应的用户一致即可访问。

  3.acl为用户组的,客户端机会使用A访问,没有 要在NameNode上创建用户A,将A加入到acl用户组,验证过程:获取客户端的用户,比如为A,NameNode节点上,通过用户A,到NameNode的主机上来查找用户A对应的用户组信息,机会NameNode上没有 用户A,认证失败,机会有用户A,没有 在acl用户组上,认证失败,有用户A,用户A在acl配置的组里面,认证成功。

  4.acl配置的用户组与客户端守护进程运行用户,所在的用户组没有 关系。

  5.每次修改hadoop-policy.xml中的值,记得要执行刷新操作。

另外:要注意,不同版本的参数,配置机会不同,要看和这一人hadoop版本一致的文档。

https://hadoop.apache.org/docs/r2.6.2/hadoop-project-dist/hadoop-common/ServiceLevelAuth.html

 https://hadoop.apache.org/docs/r2.6.2/hadoop-project-dist/hadoop-hdfs/HdfsPermissionsGuide.html#Group_Mapping

文档创建时间:2019年8月15日17:500:24